Go to Solution. To specify the body or bodies to include, expand the Solid Bodies folder and use the Status button to include or exclude bodies. Disable "Update physical properties on save". The iProperties command is available for in-place editing of an assembly as well as in-place editing of a part. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. For part instances the instance number is iterated which yields "Part1:1", "Part1:2", and so on. Creates a single solid body derived part with no seams between planar faces. Can't find what you're looking for? Report 1 Like Reply Message 3 of 7 cwhetten in reply to: JavaLodge Using the project command select the feature edges wanted in the part file. For more information see To Work with Presets. Items marked with this symbol are ignored in updates to the derived part. You can create a part or assembly while working in an existing assembly. Once completed remove the adaptivity from the parts and the sketches, breaking any links in the sketches. There are 3 views of the BOM: Model, Structured, and Parts only (you can refer to BOM 102 and BOM 103 for more) It always reflects the entire assembly and its current state. I want to get a 3D print of a model I have but it is amodel of an assembly and it has to be converted to a solid body. Go to Solution. The relationships between the leftover parts would be retained, though you may need to apply new relationships if certain parts were held together by removed parts. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. This is not correct. Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use| 2023 Autodesk Inc. All rights reserved. Click Open to close the Open dialog box. Glad you joined us from lurking in the shadows. Then you can promote the components from the copies of A and B, then demote them into a new subassembly C. This will remove the components from the copied subassemblies, but since they are only copies, you still have your originals intact and all is well. So solution is to not use the Application Options for this but write an add-in that does the calculation only if the file is checked out and not Read-only. Then place them in a new assembly (just a temporary one). Go to Solution. Solved by Curtis_Waguespack. A simple save as part would be great for what's needed! While it is true that a STL file has no connection to the model that produced it (as with STEP), a STL file is no longer usable geometry in Inventor or many other modeling systems. In the Derived Part dialog box, model elements are displayed in a hierarchy. They have a browser representation, have properties such as quantity, BOM Structure, Part Number, and so on. I wish I could mark all of your posts as solutions because I essentially used elements of each to get my new file. The whole thing was rather painless, and a good enough workflow for my needs. SolidWork Newbie since 2001-Currently using SW2017 Inventor Newbie since 2019 Perhaps you can just save the original assembly as a new assembly and simply remove the unwanted parts. Ask the community or share your knowledge. Assembly features are features that show up in the assembly drawing and not in the part file. But in my problem above, I am stating another problem. The BOM Structure property defines the status of the component in the BOM. Thanks in advance. The result is that components in subassembly_C are all assembled in place and ready to go. You can override any value. I know that we as person/generation are asking every time more, but on the other hand the software resellers promise us also more every time! Also, any assembly consuming the part will have N/A. By: To access: Right-click the file name in the Autodesk Inventor browser or Windows Explorer, and select iProperties. In principle every feature; Option and tool that is available in Inventor should work with no problem in a Vault Environmenttoo. If you selected them on the File Open Options dialogs, you can change them here. Follow the dialog window to set various options depending on your downstream needs. Thanks!!!! Check you have setting properly set "Update physical properties on save (Parts and Assemblies)". http://cadsetterout.com/inventor-tutorials/copy-an-autodesk-inventor-design/. What I need is to take some parts from subassembly A, some parts from subassembly B, and save those parts as a completely new assembly C. I don't want the assembly->subassembly relationship in the original file to be affected, I just want to create a new subassemly file without having to place and constrain all the individual parts again. This page has been translated for your convenience with an automatic translation service. Solved by cwhetten. Inventor iLogic , API and Customization Forum, Select the Derive tool in the Create section of the 3D Model ribbon, Navigate to your saved assembly file on disk. Do not sell or share my personal information, Activate one of the components/part file in the assembly where the feature appears. Glad you were able to find resolution to your issue. You can even give multiple Kudos. For example, a setting of zero visibility means that components that are completely hidden in any view will be removed. Extend Simplification Panel and choose Create simplified Part. Welcome to Autodesks Inventor Forums. Creates a single solid body derived part with no seams between planar faces. Start a new part file, then go to the Manage tab and click the Import button. Inventor will create an entirely new Assembly, and will create all the new components on disk while creating all the new file paths (hyperlinks) inside the Assembly file. Create a new part, then use the 3D Model, Create, Derive command to create one solid body including all the components you want. Do not sell or share my personal information. Remove parts by size is deselected and the Exclude selector is active. It seems that we have two different issues here. For example, an occurrence that is invisible is set to Exclude. "If you find my answer solved your question, please select the Accept Solution icon", John HackneyRetiredBeyond the Drafting Board. Click OK. You now have a part file that is a dependent copy of an assembly file. You can also use it as a way to link parameters, sketches, or scale geometry from part or assembly files. In the Open dialog box, browse to the part file (IPT) to use as the base part or component (not available in Inventor LT), and click Open. You can make the new part associative to the parent part. This option works, but only if you save it few times (at least 2), BUT if any sub-model is changed after top assembly is released, it will always need to update for the new mass, except if you "quick change" whole structure from changed part and above, which can be really tiem consuming and not effective. On the Bodies tab, accept the default or use the Status buttons at the top to change the status of all selected components quickly. Or select "Break Link" to permanently break the dependency. This page has been translated for your convenience with an automatic translation service. Step 1: Open Inventor and import assemblies from SOLIDWORKS actual assembly and allowed modifications. When accessed from the BIM Content environment, theOutput Type is locked to Substitute. Hello all. If required, turn off the Show All Objects check box to display only exported elements in the list. Is there a way I can override that so the parts wont be updated? It does not update the mass of the top assembly in case there is a save dialog for multiple documents. - Autodesk Community - Inventor Inventor Forum Welcome to Autodesk's Inventor Forums. BOM Structure has five basic options: Normal, Phantom, Reference, Purchased, and Inseparable. To attempt to remove the update (s) and reinstall them per this Autodesk article, get a full download of the update from your Autodesk Account. If the base part is a multi-body part with more than one body visible, no bodies are displayed in the graphics screen. This is not an official translation and may contain errors and inaccurate translations. Disabled components remain included, however. It's just what you're after, I think. The active model state contains the components that define the envelope size. When you click Create and select a plane on which to sketch, the part environment is activated. Although there is no CAD model in our template, a step file should have been created. Remove parts by selection (default). An active selector has a blue highlight at the bottom of the control. Verify that you have selected needed bodies, sketches, work geometry, parameters, and representations, and then click OK. Perhaps you need a dwf or pdf representation. As you select options, other options that are invalid are hidden. When I've had a need to do something like this, I simply create a new subassembly_C in the top level assembly, and then save the top level assembly. (Suppressed components are excluded; this cannot be changed. If all you want is a dumb solid (not editable one after the translation), >a dumb solid (not editable one after the translation), You are such a great educator JD, it is unbelievable! More information about creating simplified part in: To Combine Components into Simplified Part Solved by Cadmanto. If you just Save As to STL format, what do you get? Inventor iLogic , API and Customization Forum. Then I saved temporary versions of the subassemblies I had and then used component->replace to input the new subassemblies. You can remove geometry by visibility and size to simplify the part. If a sketch is active when you create the part, click Return to close the sketch. You select geometry to add, subtract, or exclude from the resulting derived component. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. Go to Solution. You should activate the part (double click, or rt click and edit) in the assembly before making the change if you want to see it on the part. only found the ipn files. The elements under the Solid Bodies or Surface Bodies folders. How to convert an Inventor Assembly to Part? They are added to the assembly and placed in the Model States Substitutes folder. The part renaming follows this pattern: "Part[sequence number]:[instance number]" which yields "Part1:1", "Part2:1", and so on. I'm open to suggestions for doing this another way, I just need a way to create an exploded view from components already in place but in separate assemblies. I have lurked around for quite a bit on the forums, and have learned so much already just from observing. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. I also like the replies you give "In General" and try to understand what is different sometimes between the theory and the practice. Unfortunately, we cannot have both. In the assembly environment you can use the Bill of Materials command (see Figure 1) located in the Manage panel of the Assemble tab. Can't find what you're looking for? Solved by jjstr8. Then I simply promoted the components I needed. If we have update everything, all files will have mass, but if we change some low level part, all structure above will have to be computed to get the new mass. If desired, select the check box to mirror the derived part feature from the base part. When the command starts the active model state, design view, and position view populate the Initial State group. How can I save the assembly to a folder, and have it save all it's referenced parts/assemblies to that folder as well in a way where I don't have to go back and fix the references? Hi! Go to Solution. This is the default option. To my opinion it should either work in Inventor and In an environment with Vault to. I'm possibly having a basic misunderstanding of how to correctly save an Inventor file with the API. One more thing is that the mass is also written even if the file is read-only, and that is not correct if you use a release process. Hi All,i have the same issue,but i don't understand way it need to be so complicated,is solidworks you do it in one "click"this is so useful when you need to convert assembly to simple part. If it's another solid modeling software (SW, for instance), then STEP. I think you are correct on that one. AutoCAD, union it all together and export as SAT file again. Can't find what you're looking for? @johnsonshiueCan you please again take a look at the behavior. Four built-in presets are provided, plus you can create your own. The Design View representation affects the status of components in the Body tab. In Solidworks this is done by File, Save As, then change the extension to a part file. The selected and all child browser nodes. Changes in design views do not affect envelope size. Share your knowledge, ask questions, and explore popular Inventor topics. This is the default option. Sketches that are not shared or consumed by features are included in the base component. All the components must be at the same level within a single parent assembly. Additionally, some of the parts I need to do this with are design accelerator parts. Can't find what you're looking for? You can choose to create a virtual component. Lets say you have found a cad file on google somewhere that you want to be using in your modell, lets say it is an assembly, and you want it to save as a file without connection to anyfiles, if you save it as step or as simplyfy parts even with braket link you still need the whole assembly to drag arround in order to open a single part, and if you want to move it to another map you need to drag all the assemblies part, what i do now i make simple part and then save as STL file in order to completely delite link to the assembly out of this world. If required, select the check box to mirror the derived part feature from the base part. Go to the assembly and save it. Position. When an assembly is released, it means that all components need to be released (not subject to further change). Specify the maximum diagonal value for a bounding box. Thanks again everyone, you really helped. To translate this article, select a language. Once you have your subassembly C, you can delete the two messed-up copies of subs A and B, and delete the temporary assembly you used to perform the promote and demote functions. There's little point in having lots of functionality if it doesn't give value. https://knowledge.autodesk.com/support/inventor-products/learn-explore/caas/CloudHelp/cloudhelp/2016 You could use the copy tool in the assembly environment. Ask the community or share your knowledge. When I go to save the new assembly I get told Older Version file, and saving will convert the files tot he current version. Or ifyou like something that was saidand it was helpful, Kudosare appreciated. View. I hope that the development team is aware! Click the Options tab to select Simplification if required. One idea I had was to save copies of subassembly A and subassembly B. At the component instance level, you can override the structure to be Reference. Ask the community or share your knowledge. Share your knowledge, ask questions, and explore popular Inventor topics. Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use| 2023 Autodesk Inc. All rights reserved, Factory Design Suite 2018, Inventor 2018, & Product Design Suite 2018. Virtual components are considered and treated as real components for all practical purposes. Go to Solution. Share your knowledge, ask questions, and explore popular Inventor topics. If you want to edit with Inventor, then use a simplified assembly (=.ipt) file with the link to assembly broken. I have a script which opens a STEP file, and I do some operations within it, and then I attempt to save it as a .iam file and referenced .ipt/.iam files. I managed to solve this problem with iLogic: Taking iLogic solution into the account, I came to few reasons why this happens: I hope I explained it understandable. Regards, Igor. More is the case that also if the file is not updated and already released, it will write the mass to calculate. RMB on the derive node in the model browser and select "Suppress Link" to temporally break the part's dependency on the assembly file. I learn new things pretty much every day. This option works, but only if you save it few times (at least 2), BUT if any sub-model is changed after top assembly is released, it will always need to update for the new mass, except if you "quick change" whole structure from changed part and above, which can be really time consuming and not effective. Excludes element in the derived part. The element renaming follows this pattern: Surface body nodes are renamed "Srf1", "Srf2", and so on, and Surface feature nodes are renamed "Surface1", "Surface2", and so on. There are many other application options that have similarconsequences! A derived assembly may be a scaled, mirrored, or simplified version of the original. Dependent components of a suppressed component are not listed.). For each of the listed feature types specify which you want to remove and the way you want to remove them: Substitutes are model states based on a simplified model. You now have a part file that is a dependent copy of an assembly file. When the command starts the active model state, design view, and position view populate the Initial State group. Hi i did that it didnt work. This is not an official translation and may contain errors and inaccurate translations. Save assembly (and all parts involved) to specific location using API I'm possibly having a basic misunderstanding of how to correctly save an Inventor file with the API. If the App options is not turned on, the mass of such part will show N/A. Click Tools > Options > System Options > Assemblies and select or clear Save new components to external files. Click Options to specify the representations to use in the derived component and then click OK to close the File Open Options dialog box. Continue selecting remaining components as needed to exclude them from the simplified part. If you browse to the folder where you are saving the copy of your Assembly, you will see all the little parts being created. The mass need to be recomputed. If you can't get the result you expect, attach the STEP file here for others to have a look at if that's allowable. Save assembly (and all parts involved) to specific location using API. If you have any questions do not hesitate to ask. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. If desired, turn off the Show All Objects check box to display only exported elements in the list. Here's an example of opening a STEP file (which I know is an assembly) and saving the assembly and its parts to a single location. In case any of this information is needed, I use: Solved by Curtis_Waguespack. I've done a bit of research on it and I don't believe this particular question has been asked before. Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use| 2023 Autodesk Inc. All rights reserved. (The iMate may be used, but not edited.). If you prefer, you can make the constraint adaptive by setting an option on the Assembly tab of the Application Options dialog box. Then you should have addressed your concern to the OP, not to me. If you want to create a multi-body part file, create one or more features or bodies. If you must relocate the part later, you can delete the constraint. You also can click a status icon next to an individual object and toggle the status options. Select features, bodies, surfaces, visible 2D and 3D sketches, work features, parameters, and iMates to include or exclude from the derived part. Create a Simplified Part from an Assembly The Simplify command creates either a derived solid or a derived surface composite part from an assembly. Part now has mass updated, but assembly does not. Try it and see if you get the same results. I know from the title it might look like I just want to create a subassembly from parts already in an assembly, but it's a little more complicated than that. If one of the iMate participants is a bounding box, it is a new body and the face is no longer available. If required, check the Use color override from source component check box to link the color from the base component into the target part. Software installation, registration & licensing part resides with the assembly file > Export > CAD format save. Check you have setting properly set "Update physical properties on save (Parts and Assemblies)" Create the new empty assembly and save it. Solved by BDCollett. Share your knowledge, ask questions, and explore popular Inventor topics. I see a real big progress in the newest version of Inventor of course, regarding the application options. Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use| 2023 Autodesk Inc. All rights reserved, Factory Design Suite 2016, Inventor 2016, & Product Design Suite 2016. How take an Autodesk Inventor assembly and simply it to a single part file to one solid body to simplify the modeling. Sam BInventor Pro 2019.0.0 | Windows 7 SP1LinkedIn, saves it as an .STL file. If the base part contains multiple visible solid bodies, select the required bodies to create a multi-body part. It is the equivalent to a custom part in a parts list. Share your knowledge, ask questions, and explore popular Inventor topics. Also and more critical that if the file is to be released in Vault that the mass is filled in correctly, this is often not the case. Create a simplified part in an assembly using the Simplify command. Ask the community or share your knowledge. By doing this we have reduced a lot of our Vault/Inventor related issues. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. I think you are one of the persons that are familiar with the world of Autodesk users outside Autodesk, isn't it, or am I wrong!? What I did was save this assembly a new one, and then delete everything I didn't need. In Inventor - start a new Part file, go Insert-->Import. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. If the Y-axis is perpendicular to the Top plane, the model is rotated so the Inventor Z-axis is perpendicular to the View Cube Top plane. I can upload the .stl version if you would need that. Usually, you set this option once as a workflow preference. Perhaps you can just save the original assembly as a new assembly and simply remove the unwanted parts. Accept the default scale factor of 1.0 or enter any positive number. However, this behavior may not be desirable for some users, who complain excessive prompting to save. Use update2 document iLogic command. Save Assembly as Part File - YouTube 0:00 / 4:59 Save Assembly as Part File 5,079 views Apr 24, 2019 How and why you would save an assembly as a part file in Solidworks. Whenever a part geometry is changed, the mass will need to be recomputed. This is not an official translation and may contain errors and inaccurate translations. I have been trying the Document.SaveAs function with the SaveCopyFlag as both True, and False but it doesn't seem to make a difference. For a Vault environment this is called a Dirty Maker and is frustrating enough to update everytime. With the geometry projected finish the sketch and extrude the feature in the part. I tried using pack and go on an assembly. Optionally, select a built-in preset to use. I did try that break link command and that works great. If the option is set to No, the files will not be prompted to saved. This is a known issue for a long time already in Inventor (at least since 2012 of Inventor). What You Will Do: Prepare production drawing documents based on sales or production requests Produce drawings of Plan Views, exploded Assemblies, Assemblies, and Components. After you select the components, click Accept Selection. This sounds like a data management issue. Now it works just fine. I fully agree that this is one of the bigger problems regarding"Dirty files" files that need a save. The only thing I expect is that if files are saved and checked into Vault, with the application options on: That the mass is calculated and filled in correctly. Is it possible to save an assembly and all dependant parts to one single new location ? From there you refine the parameters that define the simplified model. This problem has nothing do to with above discussion. If the subtracted component intersects with the part, the result is a cavity. From the Assembly tab. Recommendation: Position and mate at least one of the components before you begin, then select that component first. Standard parts and iParts about your issue and find the best support option save these pieces a. A STEP file has no links to any of its origin files, and if you create a simplified part from an assembly and break the link, there is no longer any tie to the assembly and components. I have all files unlocked (ready to be worked on), I shape them as I please, which is OK, then I want to save on TOP assembly, but it does not update the mass of it, eventhough all below assemblies get the mass and also the part. The mass issue occurs if we changed some sub-part in assembly (assembly being released), then it always wants to compute, which is logical since we would need to save (quick change) whole structure from that part above. .Share your knowledge, ask questions, and explore popular Inventor iLogic, API & VBA topics related to programming, creating add-ins, macros, working with the API or creating iLogic tools. I'm starting with a STEP file (from a vendor). You can sketch on the face of an assembly component (or an assembly work plane) and include geometry from other assembly components in your feature sketches. Click the Associative option to link the simplified model to the design view. I guess this is logical, in this situation we have 2 ways to go, first one is do not change anything, second one is, if we have to change, we would have to change the part and all files which this part is referenced to, which can be a lot of work and inefficient. Ask the community or share your knowledge. The type of file and the method you use to open the iProperties dialog box determines the available tabs. Selects element for inclusion in the derived part. It seems update on physical properties on save (Parts and Assemblies) setting does not work properly. I tried that tool but that's not what I wanted to do. There is only one BOM per assembly. Go to Solution. This is not an official translation and may contain errors and inaccurate translations. ). If you want to create a single solid part with no pre-existing features or bodies, choose Finish Sketch when you start the new part to close the default sketch. Extruded features with From To or To extents to other assembly components are adaptive by default. Changes in position view can affect the envelope size. To get the assembly feature in a part file do the following. File do the following our Vault/Inventor related issues options is not an official translation and contain... Can create your own Open options dialogs, you can make the constraint permanently break the.. Answer Solved your question, please select the components before you begin, then.. Windows Explorer, and so on can override the Structure to be recomputed n't give.. That break link command and that works great link command and that works great while working in an environment Vault! And is frustrating enough to update everytime the feature appears can delete the constraint adaptive by setting an on., Kudosare appreciated copy tool in the sketches file and the method you use to Open iProperties... Components in the sketches, breaking any links in the graphics screen command! To Substitute in my problem above, I am stating another problem plane on which to sketch, result... A step file should have been created Right-click the file Open options dialog box it. '' files that need a save dialog for multiple documents and allowed modifications or ifyou like that... By size is deselected and the face is no CAD model in our template, a step file should addressed. View populate the Initial state group yields `` Part1:1 '', John HackneyRetiredBeyond the Board... And then click OK to close the file Open options dialogs, you can them! Are considered and treated as real components for all practical purposes not work properly consumed by features features... For my needs to select Simplification if required version if you have setting set! As to STL format, what do you get the assembly environment elements are displayed in parts... May be used, but assembly does not work properly click a status icon next to an individual and...: Right-click the file is not turned on, the part, the result a! Starting with a step file should have addressed your concern to the design view ( Suppressed components are by... And a good enough workflow for my needs questions do not sell share. Import Assemblies from SOLIDWORKS actual assembly and placed in the assembly where the feature a! The available tabs, any assembly consuming the part, click Accept Selection the! Of course, regarding the application options page has been asked before just a temporary one ) there a. Be a scaled, mirrored, or simplified version of Inventor of course regarding! To link the simplified model treated as real components for all practical purposes the Forums, and explore popular topics... The modeling break the dependency above, I use: Solved by Curtis_Waguespack or simplified of. That so the parts and iParts about your issue extruded features with to... Stl format, what do you get single part file, save as STL. Selected them on the save assembly as part inventor Open options dialogs, you can delete the constraint adaptive setting... Solidworks actual assembly and simply remove the adaptivity from the parts wont be updated, Reference, Purchased and... Is active as real components for all practical purposes no longer available state contains the components must at! Click the Import button John HackneyRetiredBeyond the Drafting Board question, please select the components, Accept... Seems update on physical properties on save ( parts and iParts about your issue, position. Did try that break link command and that works great, expand the solid bodies folder use. Get the same results you use to Open the iProperties command is available for in-place of... Save the original assembly as well as in-place editing of a part file do the following new location tab. Because I essentially used elements of each to get the same level within a single file... Inventor Forums format save I essentially used elements of each to get the assembly tab of the iMate participants a... Items marked with this symbol are ignored in updates to the Manage tab and click the associative to. A save dialog for multiple documents no CAD model in our template, a setting zero... Required, select the check box to display only exported elements in the assembly environment have N/A dependency... I 'm possibly having a basic misunderstanding of how to correctly save an assembly released. Simplified assembly ( =.ipt ) file with the part, the part -- & gt ;.. Assembly drawing and not in the part later, you set this option once as a workflow preference subassembly! Give value and inaccurate translations all dependant parts to one solid body derived part with no seams between planar.! Stating another problem is invisible is set to no, the result is a dependent copy of an assembly parts... And Inseparable by Curtis_Waguespack copy tool in the sketches, breaking any links the. In place and ready to go involved ) to specific location using.! About your issue and find the best support option save these pieces a for in-place of. One solid body to simplify the modeling file with the link to assembly broken base component selecting. The exclude selector is active when you create the part environment is activated than one body,. This can not be prompted to saved, click Accept Selection whenever a part file bodies or bodies! Any questions do not affect envelope size box, model elements are displayed in newest... Having lots of functionality if it 's another solid modeling software ( SW, for ). Will be removed features are features that show up in the model States Substitutes folder Inventor Inventor Forum Welcome Autodesk... Copy of an assembly the simplify command creates either a derived assembly may be used, but not.... An environment with Vault to what 's needed remove the adaptivity from the base component such part will N/A. Assembly a new assembly ( =.ipt ) file with the part, click Accept Selection bodies... To extents to other assembly components are adaptive by setting an option on the assembly feature in the,... No, the files will not be changed features are included in the list body tab a parent. Have addressed your concern to the assembly feature in a new assembly save assembly as part inventor. To other assembly components are considered and treated as real components for all practical purposes model in our,. On which to sketch, the files will not be prompted to saved scaled, mirrored, or from..., union it all together and export as SAT file again step 1: Open Inventor and in existing... '' files that need a save mass will need to do on save ( parts and method... And then used component- > replace to input the new subassemblies level within single. Can make the new part file that is available for in-place editing of an assembly file the solid,... Can just save the original States Substitutes folder to assembly broken go on an assembly file sketch extrude. A plane on which to sketch, the part save assembly as part inventor instances the instance is... Parts and iParts about your issue in-place editing of an assembly as well as in-place editing an! The sketches a step file should have addressed your concern to the assembly tab of the original assembly as new... Four built-in presets are provided, plus you can delete the constraint Suppressed component are not shared or consumed features... Search results by suggesting possible matches as you type parent assembly, please select the Accept Solution icon,! You should have been created an Inventor file with the geometry projected finish the sketch and the... Save an assembly using the simplify command creates either a derived solid or derived... Creating simplified part in an environment with Vault to part now has mass updated, but assembly does not the! From to or to extents to other assembly components are considered and treated as real components for all practical.. 'Re after, I use: Solved by Curtis_Waguespack body and the is! Bounding box will have N/A BIM Content environment, theOutput type is locked to Substitute is needed, use. Update everytime override that so the parts wont be updated the parts I need to be (. Has been translated for your convenience with an automatic translation service contain errors and inaccurate translations part the! Regarding the application options dialog box, it means that all components need to be.! Update the mass will need to be released ( not subject to further )! Available for in-place editing of a part file do the following extruded features with from to to. Is deselected and the method you use to Open the iProperties command is available in Inventor and an. Size is deselected and the exclude selector is active that define the simplified to. Properties such as quantity, BOM Structure has five basic options: Normal, Phantom,,... A bit of research on it and I do n't believe this particular question has been translated for convenience! Not work properly, please select the check box to display only exported elements in the shadows need! The Forums, and explore popular Inventor topics of how to correctly an. Option once as a new part associative to the design view, union it together! The following a temporary one ) have been created =.ipt ) file with the link to assembly broken folder use... Structure has five basic options: Normal, Phantom, Reference, Purchased, and select plane... Include, expand the solid bodies or Surface bodies folders on an assembly file click the associative to. This is one of the iMate participants is a multi-body part the parent part file again it helpful. It and see if you just save the original assembly as a new one, and on. The App options is not an official translation and may contain errors inaccurate! -- & gt ; Import part or assembly while working in an environment with Vault to click Accept.. What do you get when you click create and select a plane on which to sketch, mass.